40
CHANNEL
Set the camera channel of MOTION DETECTION.
SENSITIVITY
The higher the number is, the more sensitive. The default is 3.
AREA SETUP
Move the cursor to the desired area and press ENTER button to save it. Press Z(+) button to select whole
area, press Z(-) button to deselect whole area.
Mouse operation: Move the cursor to the desired area and right click to enable it.
TEST MOTION
Test the MOTION DETECTION to see if it matches your demand.
6.4.2 Event Screen Mode
SCREEN HOLD: Keeping the current screen even if the event occurs.
EVENT FULL: Display the full screen of the channel which the event occurs.
EVENT MULTI: Display the multi-screen when the event occurs.
EVENT F_RTN: Display the full screen of the channel which the event occurs and return.
EVENT M_RTN: Display the multi-screen when the event occurs and return.
6.4.3 Event Message
ON: The warning message will be displayed when the event occurs.
6.4.4 Event Message Reset
Set the time to reset the OSD event message from 1SEC to 30SEC. The default is “5SEC”.
6.4.5 Event Buzzer
ON: The buzzer will sound whe event occurs. The default is “OFF”.
6.4.6 Event Record
When QUICK SETUP is ON:
