•NIGHT
DAY
: When the camera detects the current light level is higher than the
set value,
it’ll switch from
NIGHT
mode to
DAY
mode. Value:
0~63.
NOTE:
1. The setting differences between DAY
NIGHT and NIGHT
DAY should be
more than 5, or the camera will keep switching from DAY
NIGHT and
NIGHT
DAY constantly.
2. The infrared illuminator is not recommended to use under
AUTO
mode. Please
switch to
EXTERNAL
mode when an infrared illuminator is installed.
•DELAY TIME:
Sometimes there
’s only a sudden and short light level change.
Delay time can be set to avoid switching too fast. The camera will
switch the mode after the set DELAY TIME passed. DELAY TIME
can be set from 0 to 255 seconds.
•BURST :
Turn the
BURST
function off to reduce the color noise under B&W mode.
However, not every DVR machines can receive video signals without
the color burst signals. If the camera cannot switch back to COLOR
mode from B&W mode, please turn the BURST function on.
NOTE:
The
BURST
function is adjustable under
B&W
,
EXTERNAL
and
SCHEDULE
mode.
•NIGHT OUTPUT
OUTPUT
DNO
SYSTEM
GND
5V
COLOR
5V
GND
B&W
GND
5V
When the camera switches modes, the external
components will be alerted, via DNO pin of the
communication connector.
16
VSSC-68CDNR-90
