4.4 WHITE BALANCE
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please use the UP and DOWN buttons to
WHITE BALANCE
on the MAIN MENU and
press the ENTER button to do further setups.
2. Please select the desired item and press LEFT and RIGHT buttons to adjust the settings.
** MAIN MENU **
LENS
AUTO<
┘
EXPOSURE
SET<
┘
WDR
OFF
WHITE BALANCE
ATW<
┘
2DNR & 3DNR
SET<
┘
DAY/NIGHT
AUTO<
┘
IMAGE
SET<
┘
EFFECT
SET<
┘
SYSTEM
SET<
┘
EXIT<
┘
The modes under the function are:
ATW, AWB,
3200K, 6300K, ANTI CR, MANUAL, and PUSH
LOCK
.
*
AT W
(Auto Tracking White Balance)
This mode can be used within the color temperature range from 1800°K to 10500°K (e.g.,
around fluorescent lights, outdoors, around sodium vapor lamps or inside tunnels).
*
AW B
(Auto White Balance)
Select this to allow the camera automatically adjust the white balance under all conditions.
*
3200K
Select this when the color temperature is around 3200°K (when surrounded by sodium
lights).
*
6300K
Select this when the color temperature is around 6300°K.
*
ANTI CR
(Color rolling suppression)
Select to set the white balance mode to the
ANTI CR
mode
.
Follow the instructions on the screen. Wait for a few seconds for the camera to set up. When
completed, there will be a message displayed on the screen.
NOTE
:
The White
Balance cannot
fully function under the following conditions. When the
following occurred, please select
PUSH LOCK
Mode.
<
When there
’s a higher temperature surrounded the object.
<
When there
’s darkness surrounded the object.
<
When there
’s a fluorescent light surrounded the object or where the light changes all the
time.
12
VSSC-68CDNR-90
