21
6 Setup
VEGAWAVE 62 • Two-wire 8/16 mA
32255-EN-181126
Mode on the sensor
Level
Signal current - Sensor Signal lamp - sensor
Min.
Dry run protection
approx. 8 mA
Green
Min.
Dry run protection
approx. 16 mA
Red
Fault message
(min./max. mode)
any
< 2.3 mA
flashes red
VEGAWAVE 62 level switch with signal conditioning instru-
ment
1)
The following table provides an overview of the switching conditions
depending on the adjusted mode of the signal conditioning instru-
ment and the level.
Note:
Keep in mind that the mode switch of VEGAWAVE 62 must be always
set to "max.".
Mode on the signal
conditioning in-
strument
Level
Signal current -
Sensor
Signal lamp - sen-
sor
Signal lamp - sig-
nal conditioning
instrument
Mode A
Overflow protection
approx. 8 mA
Green
Mode A
Overflow protection
approx. 16 mA
Red
Mode B
Dry run protection
approx. 16 mA
Red
1)
You can find suitable signal conditioning instruments in chapter "Technical
data".
