background image

8

2 For your safety

VEGAPULS SR 68 • 4 … 20 mA/HART two-wire

38294-EN-130624

2.5  CE conformity

The device fulfills the legal requirements of the applicable EC guide-

lines. By affixing the CE marking, we confirm successful testing of the 

product.
You can find the CE Certificate of Conformity in the download section 

of our homepage.

Electromagnetic compatibility

Instruments with plastic housing as well as in four-wire or Ex-d-ia 

version are designed for use in an industrial environment. Neverthe-

less, electromagnetic interference from electrical conductors and 

radiated emissions must be taken into account, as is usual with a 

class A instrument according to EN 61326-1. If the instrument is used 

in a different environment, the electromagnetic compatibility to other 

instruments must be ensured by suitable measures.

2.6  NAMUR recommendations

NAMUR is the automation technology user association in the process 

industry in Germany. The published NAMUR recommendations are 

accepted as the standard in field instrumentation.
The device fulfills the requirements of the following NAMUR recom-

mendations:

• 

NE 21 – Electromagnetic compatibility of equipment

• 

NE 43 – Signal level for malfunction information from measuring 

transducers

• 

NE 53 – Compatibility of field devices and display/adjustment 

components

• 

NE 107 – Self-monitoring and diagnosis of field devices

For further information see www.namur.de.

2.7  Radio license for Europe

The instrument is approved according to EN 302372-1/2 (2006-04) 

for use in closed vessels.

2.8  Radio license for USA/Canada

The instrument is in conformity with part 15 of the FCC regulations. 

Take note of the following two regulations:

• 

The instrument must not cause any interfering emissions

• 

The device must be insensitive to interfering immissions, including 

those that may cause undesirable operating conditions

Modifications not expressly approved by the manufacturer will lead to 

expiry of the operating licence according to FCC/IC.
The instrument is in conformity with RSS-210 of the IC regulations.
The instrument may only be used in closed vessels made of metal, 

concrete, or fibre-reinforced plastic.

Summary of Contents for VEGAPULS SR 68

























































































Reviews: