13
3 Product description
VEGAPULS SR 68 • 4 … 20 mA/HART two-wire
38294-EN-130624
The protective cover protects the sensor housing against soiling and
intense heat from solar radiation.
You will find additional information in the supplementary instructions
manual "
Protective cover
" (Document-ID 34296).
Screwed flanges are available in different versions according to the
following standards: DIN 2501, EN 1092-1, BS 10, ANSI B 16.5,
JIS B 2210-1984, GOST 12821-80.
You can find additional information in the supplementary instructions
manual "
Flanges according to DIN-EN-ASME-JIS
" (Document-ID
31088).
The electronics module VEGAPULS series 60 is a replacement part
for radar sensors of VEGAPULS series 60. There is a different version
available for each type of signal output.
You can find further information in the operating instructions "
Elec-
tronics module VEGAPULS series 60
" (Document-ID 36801).
The antenna impedance cone is used for optimum transmission of
microwaves and for sealing against the process.
You find further information in the operating instructions "
Antenna
impedance cone VEGAPULS 62 and 68
" (Document-ID 31381).
Protective cap
Flanges
Electronics module
Antenna impedance cone
