45
6 Set up with the display and adjustment module
VEGADIS 82 • 4 … 20 mA/HART
45300-EN-170724
In this menu item, you read out the instrument type and the serial
number:
6.9 Parameter adjustment - Sensors from other
manufacturers via Generic HART
The main menu is divided into three areas with the following functions:
Setup:
Settings, for example measurement loop name, PV unit, Up-
per and Lower Range, damping
Diagnosis:
Information, for example on the device status
Info:
Instrument name
The submenu points are described below.
In the menu item "
Sensor TAG
" you edit a twelve-digit measurement
loop designation.
You can enter an unambiguous designation for the sensor, e.g. the
measurement loop name or the tank or product designation. In digital
systems and in the documentation of larger plants, a singular desig-
nation must be entered for exact identification of individual measuring
points.
The available digits include:
•
Letters from A … Z
•
Numbers from 0 … 9
•
Special char, -, /, -
In this menu item, the adjustment unit of the instrument is determined.
The selection determines the displayed unit in the menu items "
Lower
Range
" and "
Upper Range
".
Unit of measurement:
Enter the requested parameters via the appropriate keys, save your
settings with
[OK]
and jump to the next menu item with the
[ESC]
and
the
[->]
key.
Info - Instrument name
Main menu
Setup - Sensor TAG
Setup - PV unit