39
6 Set up the sensor with the display and adjustment module
VEGADIF 85 • Profibus PA
53569-EN-230814
You can enter an unambiguous designation for the sensor, e.g. the
measurement loop name or the tank or product designation. In digital
systems and in the documentation of larger plants, a singular desig
-
nation must be entered for exact identification of individual measuring
points.
The available digits include:
•
Letters from A … Z
•
Numbers from 0 … 9
•
Special char, -, /, -
In this menu item you select the application.
The VEGADIF 85 can be used for flow, differential pressure, density
and interface measurement. The default setting is differential pressure
measurement. Switchover is carried out in the adjustment menu.
Depending on the selected application, different subchapters in the
following adjustment steps are important. There you can find the
individual adjustment steps.
Enter the requested parameters via the appropriate keys, save your
settings with
[OK]
and jump to the next menu item with the
[ESC]
and
the
[->]
key.
Unit of measurement:
In this menu item, the adjustment units of the instrument are deter
-
mined. The selection determines the unit displayed in the menu items
"
Min. adjustment (Zero)
" and "
Max. adjustment (Span)
".
If the level should be adjusted in a height unit, the density of the me
-
dium must also be entered later during the adjustment.
Temperature unit:
In addition, the temperature unit of the instrument is specified. The se
-
lection determines the unit displayed in menu items "
Peak indicator,
temperature
" and "in the variables of the digital output signal".
Application
Units