manualshive.com logo in svg

Vega VEGADIF 85, Operating Instructions Manual, Page: 12 / 96

Share
Download
Vega VEGADIF 85 Operating Instructions Manual Download Page 12

12

3 Product description

VEGADIF 85 • Profibus PA

53569-EN-230814

The VEGADIS 81 is an external display and adjustment unit for VEGA 

plics

®

 sensors.

The VEGADIS adapter is an accessory part for sensors with double 

chamber housing. It enables the connection of VEGADIS 81 to the 

sensor housing via an M12 x 1 plug.

The overvoltage arrester B81-35 is used instead of the terminals in 

the single or double chamber housing.

The protective cover protects the sensor housing against soiling and 

intense heat from solar radiation.

The suitable mounting accessories for VEGADIF 85 include oval 

flange adapters, valve blocks as well as mounting brackets. 

Through the use of chemical seals, VEGADIF 85 can also be used for 

corrosive, highly viscous or hot media. 

VEGADIS 81

VEGADIS adapter

Overvoltage protection

Protective cover

Mounting accessories

Chemical seal

Summary of Contents for VEGADIF 85

































































































Reviews:

No comments