T
he backlight of the indicating and adjustment module is powered by
the sensor
.
P
rerequisite is a certain level of operating voltage
.
T
he data for power supply are speci
fi
ed in chapter
"
T
echnical data
"
.
T
he optional heating requires its own power supply
.
Y
ou can
fi
nd
further details in the supplementary instructions manual
"
H
eating for
indicating and adjustment module
"
.
T
his function is generally not available for approved instruments
.
3
.
3
O
peration
VEGABAR
65
can be adjusted with di
ff
erent adjustment media
:
l
with indicating and adjustment module
l
with the suitable
VEGA DTM
in conjunction with an adjustment
software according to the
FDT
/
DTM
standard
,
e
.
g
.
PACT
ware and
PC
l
with the adjustment program
PDM
T
he entered parameters are generally saved in
VEGABAR
65
,
optionally also in the indicating and adjustment module or in
PACT
ware
.
3
.
4
P
ackaging
,
transport and storage
Y
our instrument was protected by packaging during transport
.
I
ts
capacity to handle normal loads during transport is assured by a test
according to
DIN EN
24180
.
T
he packaging of standard instruments consists of environment
-
friendly
,
recyclable cardboard
.
F
or special versions
,
PE
foam or
PE
foil
is also used
.
D
ispose of the packaging material via specialised
recycling companies
.
T
ransport must be carried out under consideration of the notes on the
transport packaging
.
N
onobservance of these instructions can cause
damage to the device
.
T
he delivery must be checked for completeness and possible transit
damage immediately at receipt
.
A
scertained transit damage or
concealed defects must be appropriately dealt with
.
U
p to the time of installation
,
the packages must be left closed and
stored according to the orientation and storage markings on the
outside
.
U
nless otherwise indicated
,
the packages must be stored only under
the following conditions
:
l
N
ot in the open
l
D
ry and dust free
l
N
ot exposed to corrosive media
P
ackaging
T
ransport
T
ransport inspection
S
torage
10
VEGABAR
65
•
P
ro
fi
bus
PA
3
P
roduct description
28253
-
EN
-
081209