39
8 Setup with smartphone/tablet (Bluetooth)
VEGABAR 38 • Three-wire with IO-Link (2 x transistor or 4 … 20 mA plus 1 x transistor)
57532-EN-191014
The message "
Waiting for authentication
" is displayed on the smart-
phone/tablet.
After connection, the sensor adjustment menu is displayed on the
respective adjustment instrument.
If the Bluetooth connection is interrupted, e.g. due to a too large
distance between the two devices, this is displayed on the operating
device. The message disappears when the connection is restored.
Parameter adjustment of the device is only possible if the parameter
protection is deactivated. When delivered, parameter protection is
deactivated by default and can be activated at any time.
It is recommended to enter a personal 6-digit device code. To do this,
go to menu "
Extended functions
", "
Access protection
", menu item
"
Protection of the parameter adjustment
".
8.3 Sensor parameter adjustment
The sensor adjustment menu is divided into two halves:
On the left you'll find the navigation section with the menus "
Setup
",
"
Display
", "
Diagnosis
" and others.
The selected menu item, recognisable by the colour change, is dis-
played in the right half.
Fig. 24: Example of an app view - Setup sensor adjustment
Connected
Change device code
Enter parameters
