Info Tab: Fiberizer Software Licenses (Enabled by default)
For DI-1000/DI1000MPO, plug in the USB Type A (male) end into the USB Type A (female) port of the TX300S platform.
This applies for MTTplus and RXT-1200 platform
On the DI-3000, connect one end of the micro-B USB OTG cable to the micro-B USB port on the scope and the other end (USB Type A
(male)) to the fiberscope USB Type A (female) port. Once the fiberscope is detected, tap
Yes
in the pop-up window to enter the testset menu.
The fiberscope menu can also be accessed at any time from the Fiberscope icon.
Fiber Scope Detected Message
Alternatively, select the
Test Application icon
>
Utilities
>
Fiber Scope icon
.
TX300s_Platform_Manual_RevB01
Page 76 of 123
