QUICK START GUIDE: RTU-300/320/600
VeEX Inc. 2827 Lakeview Court, Fremont, CA 94538 USA Tel: +1.510.651.0500 Fax: +1.510.651.0505
3
How to Configure the RTU-300/320/600
Testing with the RTU (Remote Test Unit)
Introduction
The RTU-300/320/600 is a rack mounted 1G-100G Ethernet test head for performance testing and monitoring
Carrier Ethernet and broadband networks. The main application of the RTU-300/320/600 is to be used under the
VeSion
™
performance testing and monitoring platform, where several RTU-300/320/600 can be added and
operated for service provisioning, service activation testing, and service assurance applications.
Optionally the RTU-300/320/600 can be operated as a stand alone test device through VNC/web remote access. In
this standalone mode, users have access to other interfaces and features that are available such as OTN,
SONET/SDH, and Fibre Channel.
64K-100GE
test rates are supported on the same module. These factory-installed hardware options allow flexibility
to fit any additional application at a later time. For example, the addition of a second RTU-320 or RTU-600 module
can be installed concurrently on the same test platform.
RTU-320 Test Ports:
2 x SFP+ for Ethernet, OTN & SONET/SDH
2 x RJ45 for Ethernet
2 x BNC for E1/DS3
1 x RJ45 for E1/DS1
1 x SMA for Clock Source
RTU-600 Test Ports:
1 x QSFP28 for 100GE and OTU4
1 x QSFP+ for 40GE, OTU3
1 x External Clock Interface
Space efficient 1U rackmount with built-in, dual power switching matrix ensures continuous operation if the main
power supply fails.
