QUICK START GUIDE: RTU-300/320/600
VeEX Inc. 2827 Lakeview Court, Fremont, CA 94538 USA Tel: +1.510.651.0500 Fax: +1.510.651.0505
10
RTU Software Upgrade
Upgrading the RTU via Web Remote Access Menu/VNC (Standalone Mode)
Platform Upgrade
Note: The Platform software upgrade process is intrusive and any test will be interrupted; make sure to save any
configuration or test results before proceeding.
Click
Platform Upgrade
under the
Web Remote Access
option and perform the following steps from the Platform
Upgrade tab:
1.
Download and unzip the required software from
https://www.veexinc.com/en-us/Support/Software
. Make
sure to enter the RTU-300/320/600 serial number to find the correct file.
2.
The Platform SW (install_rtu300_platform.sh) has to be upgraded first followed by the module software
upgrade (install_rtu300_rtu320.sh/install_rtu300_100g.sh). However, if only the module SW has to be
upgraded, there is no need to upgrade the platform.
3.
Browse the software image file by clicking the
select file
button.
4.
When the file is selected, click
Upload
to send the file to the RTU-300/320/600.
