QUICK START GUIDE: RTU-300/320/600
VeEX Inc. 2827 Lakeview Court, Fremont, CA 94538 USA Tel: +1.510.651.0500 Fax: +1.510.651.0505
6
Before getting prompted to enter the S/N, the RTU must be powered off, then on again as stated in the
Status
window.
Enter the unit’s serial number when the dialog box appears and click
Ok
.
4.
The probe’s default IP address settings will be populated after the serial number is entered. The VeSion server
IP address (
Probe Server IP
) must be assigned in order to use VeSion to log in to the unit and launch tests. The
Local IP
address should be modified according to your network IP settings
–
VNC will use this IP address to log
in to the unit.
5.
Make sure that
Probe Server Port
is
12320
.
Note: The
VeSion server IP address
, the
RTU-320 Probe Number
, and
VeSion TCP Port number
need to be configured in
order for the VeSion system to talk to the RTU.
6.
Modify the IP address as required under
Local IP/Local Subnet/Local Gateway
. Click
Apply
.
