FX8x Series User Manual
Page 37 of 50
11.1 Editing Notes to Measurement Results
By default, every measurement is appended with the ‘COMMENT###’ note, where ### is the
number incremented by “1” with every measurement. This is convenient when measuring
several fibers within one batch or one splitter.
The note can be edited as described below, then the updated text applies to the next
measurement.
1. Press
|F3| (MORE)
, then press
|F1| (NOTE)
. The screen shown below then appears.
Editing comments to future measurement results
2. Press
|F1| (INDEX/COMMENT)
until the cursor starts flashing in the INDEX field or in the
COMMENT field.
3. Then use the
|Up|
and
|Down|
buttons to position the cursor in the set of symbols. The active
symbol then gets flashing. Use the
|Up|
and
|Down|
buttons to select another symbol if necessary.
4. Press the
|Shift/Enter|
button to insert the selected symbol from the list at the end of the selected
field.
The comment can include up to 10 symbols (including 3 symbols of the Index).
5. To erase the last symbol of the top line, place the cursor after that symbol, then select the left arrow
in the set of symbols (
) and execute the command by pressing the
|Shift/Enter|
button.
6. To save the note for the next measurement and exit the
NOTE
mode, press the
|F3| (EXIT)
button.
