FX8x Series User Manual
Page 12 of 50
5.2 Setting Date and Time
Set the device date and time before attempting to save any measurement results:
To configure settings:
1. Power ON the device by pressing and holding the
|Power|
button for 3 seconds;
2. Press
|Shift/Enter|
+
|Down|
to enter the
Settings
mode. The following parameters can be set:
•
Auto Shutdown mode
•
Time
•
Date
The test parameter currently selected and available to edit will flash.
Instrument Setting screen
3. Press
|Up|
and
|Down|
to select the parameter to edit.
4. Press
|MODE|
to select the field to edit, then change the value, if necessary, by pressing
|Up|
and
|Down|
.
5. Press
|Shift/Enter|
to save the date and time settings.
5.3 Resetting the Device
To reset the device:
1. Disconnect external power supply from the device.
2. With the device
OFF
, press the red
|Power|
button and hold it for at least 20 seconds.
After the device reboots, set the date and time again (see Section
