FX8x Series User Manual
Page 26 of 50
The setting screen for DWDM Light Source
The
symbol in the top-right corner is flashing while the laser wavelength is being set.
3. To set the Channel, press
|F2| (CHANNEL)
. Then select the Channel by pressing
|Up|
and
|Down|
. To confirm the setting, press
|Shift/Enter|
.
Selecting wavelength for DWDM Light Source
4. To set the mode, press the
|F3|
button repeatedly. You can choose from Continuous
Wave (CW), 270 Hz, 330 Hz, 1000 Hz, and 2000 Hz, the selected value is shown
onscreen in the
Laser
field (see below):
