Applying Power to System
Warm Boot
21
Warm Boot
CONSOLES WITH DISPLAY
Once the system is setup, every time power to consoles is switched Off and On, the software will run a self-
diagnostic warm boot program and display the test results:
Test Passed
Test Failed
Action (If Failed)
RAM TEST - OK
RAM FAIL
Replace CPU board
ROM TEST - OK
ROM FAIL
“
“
“
WARM BOOT
STARTUP COMPLETE
If a fault is detected an error message will be displayed and the system will halt. When the warm boot completes
the display returns to the top level status message.
CONSOLES WITHOUT DISPLAY
Once the system is setup, every time power to the console is switched Off and On, the software will run a self-
diagnostic warm boot program. Wait 30 seconds and the system should return to normal operation with previous
setups intact.
