15
Configure the ProtoNode
Select Field Protocol and Set Configuration Parameters
•
On the Web Configurator page, the first configuration parameter is the Protocol Selector.
Figure 15. Web Configurator Showing Configuration Parameters
•
Select the field protocol by entering the appropriate number into the Protocol Selector Value. Click the Submit
button. Click the System Restart button to save the updated configuration.
Protocol specific parameters are only visible when the associated protocol is selected.
If Modbus TCP/IP was selected and is used for the field protocol, skip “Setting ProtoNode
Active Profiles” section below. Device profiles are NOT used for Modbus TCP/IP.
•
Ensure that all parameters are entered for successful operation of the gateway. Find the legal value options for
each parameter under the Parameter Description in parentheses.
NOTICE
NOTICE
