C&C Mode
C&C Mode Setup Categories
38
Input Type
Figure 39 illustrates Input Type setup choices. Quadrature is the default input type.
Figure 39. Input Type Setup
Product Description
Figure 40 illustrates Product Description setup choices. You can assign up to eight products for the EMR4. Each
product has a type, a name, and a temperature compensation factor. Thermal compensation for all products is
calculated by either thermal coefficient or density, which you select in Delivery Options Setup (page 48).
Entering a Custom Name for a Product Type
There are eight default Product Types in the EMR4. If you select one of the default Product Types you do not have
to accept a default Product Name. For example, if you wanted to assign Jet Fuel to Product 1, select Jet A as the
Product Type for Product 1 and change the Product Name from Jet A to Jet Fuel.
INPUT TYPE
QUADRATURE
CUR LOOP LOCAL
SINGLE PULSE
DUAL PULSE
SWITCH CLOSURE
RS-485 LOCAL
-
+
CW COUNT UP
CCW COUNT UP
-
+
Note: If after setting count direction, the Register
Field displays a negative dispense volume, you will
have to reset this entry to the opposite direction.
Only Quadrature is supported
at this time and is the default.
RETURN TO
FUEL SOURCE
FIGURE 37
