14
DIS-51 To TLS Console Wiring Connections
Connection Instructions - DIS-51 to TLS-450 Series
Software Setup For TLS-450/TLS-450 PLUS Serial 2 Port
Go to Menu>Setup > Communication > Serial Port and select
Serial Port 2
.
Enter the following parameters:
• Label - e.g. DIS-51 Display
• Usage - RS-485
• Baud Rate - 9600
• Data Bit - 8
• Parity - No Parity
• Stop Bit - 1
• Use Handshaking - No Handshaking
• Security Code - Serial Command Security can be used but this requires that this
feature is also enabled in the DIS-51 Display and that the
Security Code is set to the same characters in both devices.
Use Configuration menu to enable and change the Security
Code settings in the DIS-51. See “Entering and Changing the
Security Code in DIS-51” on page 21.
• RS232 End of Message - Disabled
• EXT Character Display - 0x03
• ETX Character Computer - 0x03
Summary of Contents for DIS-51
