15
DIS-51 Configuration Screens
The user enters the Configuration Main Menu after pressing on the push-button
switch for more than10 seconds.
Once in the Configuration Main Menu, the following actions can be triggered by
pressing the push-button switch as discussed below:
Pressing the push-button switch for less than 2 seconds (short press):
• The cursor (
<
) moves to the next line item in the menu.
• If the cursor is on the bottom line of the display and another menu item exists,
that menu item will be displayed in the bottom line.
• If the cursor is on the last available menu item, it jumps back to the top item in
the menu.
Pressing the push-button switch for more than 2 seconds (long press):
• If the cursor IS on the top line item of a menu, it returns to the next higher menu
or leaves the Configuration Main Menu.
• If the cursor is NOT on the top line of a menu, the selected menu is opened, or
the configuration is selected/changed.
After exiting the Configuration Main Menu, all changes are automatically stored and
saved even after turning off the system.
Do not interrupt the power supply while in the Configuration Menu or
any changes will not be saved.
Main Menu
Configuration Main Menu:
Configuration Main Menu (scrolled down one line):
Summary of Contents for DIS-51
