18. Insert R5 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
19. Locate resistor R8. This is 24.3K resistor (red-yellow-orange-
red). Carefully bend the leads close to the resistor body as in
Step #1.
20. Insert R8 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
21. Locate resistor R10. This is 24.3K resistor (red-yellow-orange-
red). Carefully bend the leads close to the resistor body as in
Step #1.
22. Insert R10 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
23. Locate resistor R13. This is 24.3K resistor (red-yellow-orange-
red). Carefully bend the leads close to the resistor body as in
Step #1.
24. Insert R13 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
25. Locate resistor R14. This is 24.3K resistor (red-yellow-orange-
red). Carefully bend the leads close to the resistor body as in
Step #1.
26. Insert R14 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
27. Locate resistor R15 This is 24.3K resistor (red-yellow-orange-
red). Carefully bend the leads close to the resistor body as in
Step #1.
28. Insert R15 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
29. Locate resistor R6. This is 1.82M resistor (brown-gray-red-
yellow). Carefully bend the leads close to the resistor body as in
Step #1.
30. Insert R6 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
31. Locate resistor R9. This is 1.82M resistor (brown-gray-red-
yellow). Carefully bend the leads close to the resistor body as in
Step #1.
32. Insert R9 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
33. Locate resistor R12. This is 1.82M resistor (brown-gray-red-
yellow). Carefully bend the leads close to the resistor body as in
Step #1.
34. Insert R12 into its mounting holes so the resistor body rests
against the board. Solder in place and trim the leads.
35. Locate resistor R16. This is 1.82M resistor (brown-gray-red-
yellow). Carefully bend the leads close to the resistor body as in
Step #1.
36. Insert R16 into its mounting holes so the resistor body rests
