specifying a 1% tolerance.
PARTS PLACEMENT DIAGRAM
Figure 1
STEP-BY-STEP ASSEMBLY
Before assembling your kit, please take time to read and understand the
VEC kit warranty printed on the inside cover of this manual. Also, read
through the assembly instructions to make sure the kit does not exceed
your skill level. Once you begin construction, your kit will be non-
returnable. Finally, if you haven't already done so, please verify that all
parts listed in the inventory are included. If anything is missing or broken,
refer to the warranty instructions for replacing missing or damaged parts.
Note that part designators, such as R1, C3, etc., appear on a silk-
screened legend on the component-mounting side of the printed circuit
board. This corresponds with the parts placement page in the manual.
All parts will be inserted on the silk-screen side of the board.
If you have last-minute questions about what you need to build your kit,
please refer back to the section titled "Tools and Supplies". If you're
ready to begin now, here we go!
The directions use two sets of check boxes. Check one when a step is
complete and use the other for double-checking your work before
operation.
