Vectron POS Vario, User Manual

Page: 167 / 368

167
Operat ion 12.
This chapter gives an overview on the functions of your Vectron
POS system and an introduction into the basic operating proce-
dures. Your Vectron dealer has programmed your POS system to
meet your operating requirements. Some of your operating pro-
cedures may therefore differ from those described in this manual.
Your Vectron dealer will fully explain the functions installed for
you.
Notes
The following operating instructions of the POS system •
use the term „key“. The Vectron POS ColorTouch, POS
Vario and POS Mini with touch screen allow the applica-
tion of the touch screen. „Key“ therefore refers to the
corresponding buttons of the touch screen
As of version 4.0 of the Vectron POS software the but- •
tons on the touch screen display their functions mainly
by small pictographs, so-called icons. The icons contai-
ned in the Vectron POS software and their meaning are
explained in the supplement.
Sign in and out at the POS system 12.1.
The operator must sign in to the Vectron POS system in
order to enter PLUs or hold-buffers. Thus you can verify at
any time which operator has made which entries. Different
users can be vested with different authorizations, e.g. void.
There are various possibilities to sign in or out at the Vect-
ron POS system.