27
4 . 2 .6 . 2 . Status LEDs
On the upper edge of the POS MobilePro III there are two
status LEDs.
• Status LED 1 shines green or red.
• Status LED 2 shines blue.
The default setting signals the following operating status.
Colour
Interval
Status
blue
flashing
The POS MobilePro III has re-
ceived a message.
green
flashing
The POS MobilePro III is in the
charging station and the battery
is being charged.
green
permanent
The POS MobilePro III is in the
charging station. The battery is
charged completely.
green
slowly flash-
ing
The POS MobilePro III is in idle
state.
red
blue
permanent
On-/Off key and right softkey
are pressed to switch off the
POS MobilePro III.
4 . 2 .6 . 3. Acoustic signaller
The POS MobilePro III has an installed buzzer. It is suited for
acoustic output of hints and warnings.
4 . 2 .6 .4 . Vibration motor
The integrated vibration motor serves for silent signalling.
Summary of Contents for POS MobilePro III
