Vectrix VX-1 Manual Download

Page: 62 / 86

5-2

General Maintenance

Brakes

Brake Fluid Level Inspection
WARNING:

Do not spill brake fluid on painted surfaces,

the finish could be damaged. Spilling brake fluid on the

body plastics will cause them to crack. Clean off any

brake fluid spills immediately.

Always place a shop towel under the master cylinder

reservoir prior to removing cover.

Low fluid levels may indicate worn brake pads or a

leak in the hydraulic system. Inspect the brake pads for

wear and/or the hydraulic system for leaks. Use only

new DOT 4 brake fluid from a sealed container.
The brake fluid should be flushed out and replaced

every two (2) years.

Battery

WARNING:

You must leave your scooter on the

charger if you expect it to sit in storage or unused for

more than one (1) month.

Please leave your Vectrix scooter plugged in whenever

possible.

1. The battery is a Lithium-Ion Phosphate system.

While it does require charging, it does not require

maintenance.

2. The battery should be kept away from excessive

heat. The silicon/lead cells should not get above

71°C (160°F). Do not store in a hot trailer.

3. Only your authorized Vectrix dealer is qualified to

have access to and troubleshoot the battery.

4. Dispose of the battery according to your

state and local laws.

Summary of Contents for VX-1























































































Search results

Summary of Contents for VX-1

Reviews:

Related manuals for VX-1

Brands by name

Popular brands

Vectrix VX-1, Manual

Search results

Summary of Contents for VX-1

Reviews:

Related manuals for VX-1

Brands by name

Popular brands