manualshive.com logo in svg

Vectrix VX-1, Manual

Share
Download
Vectrix VX-1 Manual Download Page 49

4-7

Accessory Power Outlet

The accessory power outlet (A) is located inside the 

glove compartment. It is for charging of a 12 volt wireless 

phone. Lift the cover to access the outlet. Close the 

cover when not using the outlet. The device requirements 

should not exceed 0.5 amps (6 watts).

A

Battery Charging

CAUTION:

 

 

• Use extreme caution when dealing with electricity.  

 

Use  residual  current  device  (RCD)  or  ground  fault   

 

circuit interrupter (GFCI) protected AC voltage    

 outlet. 

 

•  DO  NOT  use  non-grounded  electrical  plug   

 

 adapters.

 

•  DO  NOT  use  the  charging  cord  if  any  part  of    

 

charging cord is damaged.

WARNING:

 

•  Do  not  use  portable  or  stationary  backup   

 

 

generating equipment to charge the scooter; this  

 

may damage the scooter’s charging system. 

 

Only charge from a utility supplied voltage source.  

 

The  appropriate AC  voltage  should  be  120v/60Hz 

 

 

or  220v/50Hz.

 

•  Vectrix  does  not  advise  the  use  of  extension     

 

cords to charge the scooter. If you use an  

 

 

extension cord, it must be of the correct size    

 

to avoid excessive voltage drop. The extension   

 

cord should be rated for 20 amps and NO longer  

 

than  7.6  m  (25  ft).

Summary of Contents for VX-1























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands