Vectrix VX-1 Manual Download

Page: 79 / 86

7-3

• Warranty is voided when:

The end user has treated the VX-1 contrary

to regulations, especially by overloading the

vehicle.

The end user has even one of the VX-1

inspections outlined in the Customer Service

book or a repair performed by a workshop

or repair facility that is not authorized

by Vectrix.

The VX-1 operating, maintenance, and service

instructions outlined in this manual have not

been followed.

The end user neglects the battery charging

procedure outlined in Chapter 4 Page 7

“Charging the Battery.”

• The following are excluded from the Warranty:

Light Bulbs

Brake Pads and Brake Discs

Tires

Accessories not part of Standard Equipment

FOR USA Vehicles Only

Safety Defects

Contact the National Highway Safety Traffic

Administration (NHSTA) if you believe that this vehicle

has a defect that could cause an accident, injury, or

death. Also, contact Vectrix, LLC immediately. If the

NHSTA receives multiple complaints, it will lead an

investigation. The NHSTA may opt to recall vehicles if it

perceives a safety threat. The NHSTA cannot deal with

individual problems with dealerships of Vectrix, LLC.

The NHSTA can be reached at

1-800-4848-9393

or you can write them at:

NHSTA

U.S. Department of Transportation

Washington, D.C. 20590

Summary of Contents for VX-1























































































Search results

Summary of Contents for VX-1

Reviews:

Related manuals for VX-1

Brands by name

Popular brands

Vectrix VX-1, Manual

Search results

Summary of Contents for VX-1

Reviews:

Related manuals for VX-1

Brands by name

Popular brands