background image

3

SAFETY INFORMATION

WARNING: 

Warning statements identify conditions or practices that may result in

personal injury or loss of life

1. When working with lead acid batteries, always make sure immediate

assistance is available in case of accident or emergency.

2. Always use protective eyewear when using this product: contact with battery

acid may cause blindness and/or severe burns, be aware of first aid

procedures in case of accidental contact with battery acid.

3. There is a risk of explosive gases being released when lead acid batteries

are being charged or discharged. Failure to follow instructions may cause

property damage, explosive hazard, and/or personal injury.

4. When connecting the battery clamps to a discharged battery, and an alarm

sounds - the polarity is reversed.

5. When charging unit from a 110/120 Volt AC electrical outlet in any wet or

damp area, make sure that the outlet used is protected by a ground fault

interrupt (GFI) Switch.

6. When charging the unit near water, do not allow the electrical cords and

outlets to get wet or come near water–electrical shock could result.

7. Jump-start procedures should only be performed in a safe, dry, well-

ventilated area.

8. Always store battery clamps on clamp tabs when not in use. Never touch

battery clamps together, this can cause dangerous sparks, power arcing

and/or explosion.

9. When using this unit in proximity to the vehicle’s battery and engine, stand

the unit on a flat, stable surface, and be sure to keep all clamps, cords,

clothing and body parts away from moving vehicle components.

10. Do not wear vinyl clothing when jump-starting a vehicle, friction can cause

dangerous static-electricity sparks. Remove all jewelry or metal objects that

could cause short circuits or react with battery acid.

11. Always disconnect the negative (Black) jumper cable first: followed by the

positive (Red) jumper cable, except for positive ground systems.

12. Never allow  red and black clamps to touch each other or another common

metal conductor–this could cause damage to the unit and/or create

sparking/explosion hazard. Always store battery clamps on built-in clamp tabs

when not in use.

13. Do not expose battery to fire or intense heat as it may explode. Before

disposing of the battery, protect exposed terminals with heavy-duty electrical

tape to prevent shorting (shorting can result in injury or fire).

14. Do not smoke or use inflammable items (matches, cigarette lighters, etc.)

while working on a vehicle’s battery system.

15. Keep unit out of reach of children (whether stored, or in use)!

FIRST AID:

SKIN

:

If battery acid comes in contact with skin, rinse immediately

with water, then wash thoroughly with soap and water. If redness,

pain, or irritation occurs, seek immediate medical attention.

EYES

: If battery acid comes in contact with eyes, flush eyes

immediately, for a minimum of 15 minutes and seek immediate

medical attention. 

Summary of Contents for START-IT VEC022DSCC















Reviews: