Vector Basic Interpreter Basic 80 Reference Manual Download Page 69

Page: 69 / 190

LIST

«line

number>[-[<line number>]]]

Extended, Disk

To list all or part of the program currently

memory at the terminal.

BASIC-80 always returns to command level after a
LIST is executed.

Format 1:

<line

number>

omitted,

the

proqram

listed beqinning at the lowest line

number.

(Listing is terminated

either

the

end

the program or by typing Control-C.) If

<line number> is included, the 8X

version

will

list

the

program

beginning at that liner

and

the Extended and Disk versions

will

list

only

the specified line.

Format

This

format

allows

the

following

options:

If only the first number is specified,

that

line

and

all

higher-numbered

lines

are

listed.

If only the second number is specified,

all

lines

from

the

beginning

the program

through that line are listed.

If both numbers are

specified,

the

entire

range is listed.

Summary of Contents for Basic Interpreter Basic 80






























































































































































































Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews:

Vector Basic Interpreter Basic 80, Reference Manual, Page: 69 / 190

Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews: