Vector Basic Interpreter Basic 80 Reference Manual Download Page 173

Page: 173 / 190

Disk full

All disk storage space is in use.

Input past end

An INPUT statement is exeucted after

all

the

data

the

file

has been INPUT, or for a

null

(empty) file.

To avoid this error,

use

the EOF function to detect the end of file.

Bad record number

In a PUT or GET statement, the record

number

either

greater

than the maximum allowed

(32767) or equal to zero.

Bad file name

An illegal form is used for the filename with
LOAD,

SAVE,

KILL, or OPEN

(e.g., a filename

with too many characters).

Direct statement in file
A

direct

statement

encountered

while

ASCII-format

file.

The LOAD is

terminated.

Too many ,files

·An attempt is

made

create

new

file

(using

SAVE

or OPEN) when all 255 directory

entries are full.

Summary of Contents for Basic Interpreter Basic 80






























































































































































































Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews:

Vector Basic Interpreter Basic 80, Reference Manual, Page: 173 / 190

Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews: