Vector Basic Interpreter Basic 80 Reference Manual Download Page 103

Page: 103 / 190

Purpose:

Remarks:

SAW

<filename> [,A

,P]

Disk

To save a program file on disk.

<filename> is a quoted string that

conforms

your

operating

system's

requirements

for

filenames.

(With CP/M,

the

default

extension

.BAS is supplied.) If <filename> already exists,

the file will be written over.

Use the A option

save

the

file

ASCII

format.

Otherwise,

BASIC

saves the file in a

compressed binary format.

ASCII

format

takes

space

the

disk, but some disk access

requires that files be

ASCII

format.

For

instance,

the

MERGE command requires an

ASCII

format file, and some operating system

commands

may require an ASCII format file.

Use the P option to protect the file

saving

encoded

binary

for.mat.

When

protected file is later

RUN

(or

LOADed),

any

attempt

to list or edit it will fail.

SAW"COM2",A
SAWnpROG",P

Summary of Contents for Basic Interpreter Basic 80






























































































































































































Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews:

Vector Basic Interpreter Basic 80, Reference Manual, Page: 103 / 190

Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews: