Vector Basic Interpreter Basic 80 Reference Manual Download Page 159

Page: 159 / 190

When accessing parameters in a subroutine, don't forget that

they are pointers to the actual arguments passed.

entirely

the

programmer

see to it that

the arguments in

the

calling

program match innumber,~,
and lenath with the parameters
expecte

the

subroutine.

This

applies

BASIC

subroutines,

as well as those

written in assembly language.

Assembly language

subroutines

can

written

handle

interrupts. All interrupt handling routines should save

the

stack, register A-L and the PSW.

Interrupts

should

always

re-enabled

before returning from the subroutine,

since

an interrupt automatically disables all

further

interr~pts

once

received.

The

user should be aware of which

interrupt vectors are free

the

particular

version

BASIC that"has been supplied.

Note

to CP/M

users: in CP/M

BASIC, all interrupt vectors are free.)

Summary of Contents for Basic Interpreter Basic 80






























































































































































































Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews:

Vector Basic Interpreter Basic 80, Reference Manual, Page: 159 / 190

Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews: