Vector Basic Interpreter Basic 80 Reference Manual Download Page 172

Page: 172 / 190

FOR without NEXT
A FOR

was

encountered

without

matching

NEXT.

WHILE without ~lD
A WHILE statement does not

have

matching

WEND.

WEND without WHILE

A WEND was

encountered

without

matching

WHILE.

Field overflow
A FIELD statement is attempting

allocate

more bytes than were specified for the record

length of a random file.

Internal error

An internal malfunction

BASIC-SO.

Report

under which the message

has occurred in

Disk

the conditions

appeared.

Bad file number

A statement or comm~~d references a file with

file

number that is not OPEN or is out of

the

range

file

numbers

specified

initialization.

File not found
A LOAD, KILL or OPEN statement

references

file that does not exist on the current disk.

Bad file mode
An attempt is made to use PUT,

GET,

LOF

with a sequential file, to LOAD a random file

or to execute an OPEN with a file mode

other

than I,

or R.

File already open

A sequential output mode
file

that

already

given for a file that is

OPEN is issued for a
open;

or a KILL is

open.

Disk I/O error

I/O

error

occurred

disk

I/O

operation.

a fatal error, i.e., the

operating

system

cannot

recover

from

the

error.

File already exists
The filename specified in a NAME statement is

identical to a filename already in use on ~~e
disk.

Summary of Contents for Basic Interpreter Basic 80






























































































































































































Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews:

Vector Basic Interpreter Basic 80, Reference Manual, Page: 172 / 190

Search results

Summary of Contents for Basic Interpreter Basic 80

Reviews: