22
5.2.11
Lift Height
Lift Height is a distance that the Z axis lifts when soldering finishes.
1) In
Setup
menu, press “
+
” or “
-
” key to move the cursor to
Lift Height
.
2) Press “
SET
” key to activate value (Blue indicates value can be modified).
3) Press “
+
”or “
-
” key to adjust height, the height range is 0
～
70mm.
4) Press “
SET
” key to save.
5) Press “
ECS
” key to back to Main menu.
5.2.12
Temp. Unit
The default unit of temperature is
℃
.
5.2.13
Password
Password is used to set the password to protect the Setup menu.
1) In
Setup
menu, press “
+
” or “
-
” key to move the cursor to
Password
.
2) Press “
SET
” key to activate value (Blue indicates value can be modified).
3) Press “
+
”or “
-
” key to adjust number, the password range is 000
～
999.
