11
3.2 Operation Keys Introduction
Keys functions list:
No.
Command key
Description
1
Press “CH” to select channel, there are ten channels.
2
1. In Main menu, press and hold “SET” key for 3s to enter into
Setup menu, refer to
5.2
Setup Menu
.
2. In Setup menu, press “SET” key to save parameters.
3
1. In Main menu, press “ESC” key for 3s to reset count.
2. In Setup menu, press “ESC” key to back to Main menu.
4
1. Press “ORG” key to move the machine to home position.
2. Press “ORG” key for 10s to enter into Calibration menu,
refer to
5.3
Calibration Menu
.
5
1. In Main menu, press “+” key to increase temperature by one
digit, press and hold it to continually increase.
The Max temperature is 550
℃
.
2. In Setup menu, press “+” key to move the cursor up.
