VECTECH ET9181, Instruction Manual

Page: 27 / 32

27
6. Parameters Setup

Press “+” or “-” key to move the cursor to Pre-length, press “SET” key to
enter, then press “+” or “-” key to adjust value, press “SET” key to save.

Press “+” or “-” key to move the cursor to Heat time, press “SET” key to
enter, then press “+” or “-” key to adjust value, press “SET” key to save.

Press “+” or “-” key to move the cursor to Tin Feeding, press “SET” key to
enter, then press “+” or “-” key to adjust value, press “SET” key to save.