Vecow ECX-2000 Series, User Manual

Page: 88 / 196

77 ©Vecow ECX-2000 User Manual GETTING TO KNOW YOUR ECX-2000
2.2.10 Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel
®
i219 Ethernet Phy;
LAN 2 is powered by Intel
®
I210 Ethernet engine. When both LAN 1 and LAN 2
work in normal status, iAMT 14.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer, or to
any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2 are listed as follows :
Pin No. 10/100 Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ---- MDI2_P
5 ----- MDI2_N
6 E_RX- MDI1_N
7 ----- MDI3_P
8 ------ MDI3_N
DP DVI-D
DVI-I
RST
1 2
WLAN
LAN 1 LAN 2
SIM 1 SIM 2
Micro SD
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color 10Mbps 100Mbps 1000Mbps
Left
Green/
Orange
Off
Solid
Green
Solid
Orange
Right Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
1 8