Vecow ECX-2000 Series, User Manual

Page: 83 / 196

72 ©Vecow ECX-2000 User Manual GETTING TO KNOW YOUR ECX-2000
2.2 Front Panel I/O Functions
In Vecow ECX-2000 series family, all I/O connectors are located on front panel
and rear panel. Most of the general connections to computer device, such as
USB, LAN Jack, Display, DVI-D, Display Port and any additional storage, are
placed on the front panel.
2.2.1 Reset Tact Switch
It is a hardware reset switch. Use this switch to reset the system without power
off the system. Press the Reset Switch for a few seconds, then reset will be
enabled.
DP DVI-D
DVI-I
RST
1 2
WLAN
LAN 1 LAN 2
SIM 1 SIM 2
Micro SD
2.2.2 Power Button
The Power Button is a non-latched switch with dual color LED indication. It indicates
power status : S0, S3 and S5. More detail LED indications are listed as follows :
LED Color Power Status System Status
Solid Blue S0 System working
Solid Orange S3, S5 Suspend to RAM, System off with standby power
To power on the system, press the power button and then the blue LED is lightened.
To power off the system, you can either command shutdown by OS operation,
or just simply press the power button.
If system error, you can just press the power button for 4 seconds to shut down
the machine directly. Please do note that a 4-second interval between each 2
power-on/power-off operation is necessary in normal working status. (For example,
once turning off the system, you have to wait for 4 seconds to initiate another
power-on operation).
DP DVI-D
DVI-I
RST
1 2
WLAN
LAN 1 LAN 2
SIM 1 SIM 2
Micro SD