15
/
37
and location of input cards and output cards. The LCD panel will display the
information accordingly. The introduction of basic operations is based on full
configuration (2 PCS of input cards and 2 PCS of output cards) and the
default menu will be as follows when system starts:
6-1 Select input signals for input cards
Press
“
SDI/DP
、
DVI/In-B
、
VGA
、
Video/HDMI
”
to select a signal,
and press “
In-B
or
In-
D”
to select an input card for operation.
6-2
PIP setup for input cards
Press “
PIP”
and then select “
SDI/DP
、
DVI/In-B
、
VGA
、
Video/HDMI
” as
the signal for
PIP
. Press “
In-B, In-
D”
to select an input card for
operation.
6-3
Display mode setup of output cards
There are 16
display modes
in total, press
“M1,M2 or M3”
to directly
select
display mode 1,2 or 3,and the indicator light is on; Mode 4-16 can
be selected by pressing “
M+
” to enter mode invoking menu and rotating
the knob. “
OK
” to confirm and “ ” to quit. The menu of “
Display
mode setup
” is as follows:
Each
display mode
of LVP608 includes the status and relative
parameter of displaying image:
The
size
and
location
of
image layer
(include: crop the
size
and
location
of
input image
, then output the
size
and
location
of
the copped image)
In-D(Input Card D)
Source: In-B 0s
Status: No PIP/Text
Out-K(Output Card K)
Out Channel:
CH1
CH2
CH3
CH4
In Card:
Left Right Left Right
Display Mode: M1
Output Port: 4 Ports
Out1=CH1 Out2=CH2 Out3=CH3 Out4=CH4