background image

LVP606A User’s Manual 

--------------------------------------------------------------------------------------------------- 

LED VIDEO PROCESSOR 

16

As above figure shows: the size and location of the images of 

LVP606A PIP 

window are defined by the following 4 groups of parameters: 

 

Parameters 

Definition 

Winx_Width 

Window x width 

Winx_Hori_Start

Window x horizontal start 

Winx_Height 

Window x height 

Winx_Vert_Start

Window x vertical start 

x=2,3,4,5,6,7,8,9 

In the adjustment, in order to distinguish windows 2~9, they are 

marked in different color respectively. 

Note: 

The initial coordinates (0, 0) of output image are defined on 

the left top of the output scope of 1920×1080 pixels output area. 

 

4. Brightness / Contrast / Situration/ Definition 

 

LVP606A 

supports customized brightness, contrast, color 

Saturation and definition settings. For details see table below:   

 

Item No.  Description 

Definition 

39 

Brightness 

Range: 0~100, default value: 50

 

40 

Contrast 

Range: 0~100, default value: 50

 

41 

Saturation 

Range: 0~100, default value: 50

 

42 

Definition 

Option is “Sharp” or “Normal”, 
default value: Normal 

 
Caution: (1). In order to ensure output images in complete gray, the 

output parameters are usually set as default values 

 

(2). The color parameters only apply to V1, V2 and HDMI 

signals.  

 

5. Audio configurations 

 

  LVP606A

 supports 3-channel dual-track audio switching. In the 

three channels, 1 channel is HDMI, the other 2 channels are AD1, 
AD2 external input audio. AD1 and AD2 can be respectively 
allocated to corresponding audio input of any input, and will be 
switched with the change of video input signals in synchrony. 

If 

DVI1

 is configured as external input audio, when audio signal is 

switched to 

DVI

1, external audio will be chosen as input signals, 

Summary of Contents for LVP606A





















Reviews: