To connect a 1.5" NPT pipe to the mounted adapter plate, twist the male threaded end to
the female thread on the adapter. Using allen key (I), tighten screws (D or E) onto the pipe
and secure the position. Then pull the decorative cover (B) up the pipe to conceal the
adapter plate (A) for a neat look.
1.5" NPT Pipe
(not included)
CAUTION!
Do not exceed the maximum rated weight
specified. Otherwise, serious injury or
property damage may occur.
54.5kg
(120lbs)
RATED
Version November 2015
5 Year Limited Warranty
Version November 2015
5 Year Limited Warranty
Decorative
Cover (B)
QG-PRO-PM-CA-B
QG-PRO-PM-CA-W
IMPORTANT!
Do not loosen screws all the way when making adjustments, this will disconnect the
parts and may cause injury or property damage.
Installing the Decorative Cover
2
OR
(D) x 2
(E) x 2
Adapter Plate
Allen Key
(I)
