LVP606A User’s Manual
---------------------------------------------------------------------------------------------------
LED VIDEO PROCESSOR
11
Caution:
when the width and height of current input signals are
less than the width or height of LED display (say the out_Hori_width
or out_Vert_height), Part mode will not work.
7) Shortcut mode(Mode)
LVP606A can set seven custom modes. Each mode can save
one current settings, including PIP conditions, output signals and
corresponding window place.
On/off
button is applied to start/close user mode shortcut
function. In Start condition (light on), press mode buttons(
M1~M7
)
to adjust mode directly. Otherwise, mode can be adjusted pressing
Enter
button before the presentation (like”mode 1”) on the panel
disappearing.
Mode Save:
when on/off indicator light was out, Press mode
button (
M1~M7
). And then press
knob
button
（
”Save”
）
before the
presentation (like”mode 1”) disappearing. The current PIP condition,
output signals and corresponding window place are saved under
this mode.
V. Setup
The following settings must be made by relevant qualified
technicians. For ordinary users, unless they have received adequate
technical training, they shouldn’t attempt to make the following
settings!
There are 48 items in 5 categories available for you to set in
LVP606A
.
Technicians can set these items as necessary, for details see the table
below:
