background image

Model No.

   

ET-LAE200C

EN

G

LI

SH

Operating Instructions

Replacement lamp unit 

Commercial Use

 

Thank you for purchasing this Panasonic product.

■ 

Before using this product, please read the instructions carefully, and 

save this manual for future use.

■ Before using this product, be sure to read [Read this first!] (Page E-2).

TQZJ625-1

Summary of Contents for ET-LAE200C

Page 1: ...cement lamp unit Commercial Use Thank you for purchasing this Panasonic product Before using this product please read the instructions carefully and save this manual for future use Before using this product be sure to read Read this first Page E 2 TQZJ625 1 ...

Page 2: ...let Electric shocks or explosions can result if this is not done When replacing the lamp turn the power off and allow it to cool for at least 1 hour before handling it otherwise it can cause burns Notes on replacing the lamp unit The light source lamp is a glass component If it is hit on a hard object or dropped breakage may occur Be careful when handling a light source lamp A Phillips screwdriver...

Page 3: ... screw and open the lamp cover z z Open the lamp cover slide the lamp cover in the direction of the arow shown in the right picture and let the projector stand on the side at the same time 3 Use a Phillips screwdriver to loosen the three lamp unit fixing screws until the screws turn freely Hold the used lamp unit by its handles and pull it gently from the projector 4 Insert the new lamp unit in co...

Page 4: ...nces contained in the product Part Name Hazardous Substances Pb Hg Cd Cr VI PBB PBDE Projection lamp Mechanical parts This table is prepared in accordance with the provisions of SJ T 11364 Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB T 26572 Indicates that this hazardous substance contained in at least one ...

Reviews: