Vdwall ledsync820h, User Manual

Page: 82 / 112

LVP615U
使用说明
82
a full picture independently. Connect all the processors or the first processor to be
adjusted via serial ports.
(1)Using software connect processors
Select the device ID of the first processor to be adjusted (from user setup item 6.5 “Device
ID”), click “Connect”, the processor will automatically connect the processor, the software
will read and display the current parameters (e.g.: output resolution) of the processor.
（
2
）
Select mosaic mode
Select current mosaic mode in “Specification” field, namely set how many rows and
columns the divided pieces of smaller LED will be arranged. User can also manually enter
the number of rows and columns then click “OK”. For the LED of 3648x2016 pixels, it
should select 2x2 mosaic mode.
(3)Enter actual parameters of each LED
After select mosaic mode,the result show column will show the actual LED
screen layout.input the height and width of each led screen.like the following
picture:
（
4
）
Parameters configurations of the first processor
Select the No. of the LED for showing effect in the field “Effects show” (we select the first
LED ), click “Auto calculate”, the processor will automatically calculate the due
parameter values of current processor based on the parameters entered in “Effects show”.
Select the Mosaic mode you desire, and select Sync Mosaic for the LED, the software will