background image

UM-HV1-13-11

VDO TPMS GO user guide

Page 29/32

4. LIMITED HARDWARE WARRANTY

VDO Limited Hardware Warranty

VDO

  warrants  to  the  original  purchaser  that  your

VDO

  hardware  product  shall  be free from  defects

in  material  and  workmanship  for  the  length  of
time,  identified  on  your  product  package  and/or
contained  in  your  user  documentation,  from  the
date  of  purchase.  Except  where  prohibited  by
applicable  law,  this  warranty  is  nontransferable
and  is  limited  to  the  original  purchaser.  This
warranty  gives  you  specific  legal  rights,  and  you
may  also  have  other  rights  that  vary  under  local
laws.

Remedies

VDO

’s  entire  liability  and  your  exclusive  remedy for

any breach of warranty shall be to repair or replace
the  hardware.

VDO

  may,  at  its  option,  use  new  or

refurbished or used parts in good  working condition
to  repair  or  replace  any  hardware  product.  Any
replacement hardware product  will be warranted for
the remainder of the original warranty period or thirty
(30)  days,  whichever  is  longer  or  for  any  additional
period  of  time  that  may  be  applicable  in  your
jurisdiction.

This  warranty  does  not  cover  problems  or  damage
resulting from (1) accident, abuse, misapplication, or
any 

unauthorized 

repair, 

modification 

or

disassembly; 

(2) 

improper 

operation 

or

maintenance, usage not in accordance with product
instructions  or  connection  to  improper  voltage
supply;  or  (3)  use  of  consumables,  such  as
replacement  batteries,  not  supplied  by  VDO  except
where  such  restriction  is  prohibited  by  applicable
law.

How to Obtain Warranty Support

Before submitting a warranty claim, we recommend
you  visit  the  support  section  at

www.vdo.com

  for

technical  assistance.   Valid  warranty  claims  are
generally  processed  through  the  point  of  purchase
during  the  first  thirty  (30)  days  after  purchase;
however, this period of time may vary depending on
where  you  purchased  your  product  –  please  check
with VDO or the retailer  where you purchased your
product  for  details.  Warranty  claims  that  cannot  be
processed  through  the  point  of  purchase  and  any
other 

product 

related 

questions 

should 

be

addressed  directly  to  VDO. The  addresses  and
customer  service  contact  information  for  VDO  can
be  found  in  the  documentation  accompanying  your
product and on the web at

www.vdo.com

.

Limitation of Liability

VDO  SHALL  NOT  BE  LIABLE  FOR  ANY
SPECIAL, 

INDIRECT, 

INCIDENTAL 

OR

CONSEQUENTIAL  DAMAGES  WHATSOEVER,
INCLUDING  BUT  NOT  LIMITED  TO  LOSS  OF
PROFITS,  REVENUE  OR  DATA  (WHETHER
DIRECT  OR  INDIRECT)  OR  COMMERCIAL

LOSS  FOR  BREACH  OF  ANY  EXPRESS  OR
IMPLIED  WARRANTY  ON  YOUR  PRODUCT
EVEN  IF  VDO  HAS  BEEN  ADVISED  OF  THE
POSSIBILITY  OF  SUCH  DAMAGES.   Some
jurisdictions  do  not  allow  the  exclusion  or
limitation  of  special,  indirect,  incidental  or
consequential damages, so the above limitation or
exclusion may not apply to you.

Duration of Implied Warranties

EXCEPT  TO  THE  EXTENT  PROHIBITED  BY
APPLICABLE  LAW,  ANY  IMPLIED  WARRANTY
OR  CONDITION  OF  MERCHANTABILITY  OR
FITNESS  ON  THIS  HARDWARE  PRODUCT  IS
LIMITED IN DURATION TO THE DURATION OF
THE 

APPLICABLE 

LIMITED 

WARRANTY

PERIOD 

FOR 

YOUR 

PRODUCT.  

Some

jurisdictions  do  not  allow  limitations  on  how  long
an  implied  warranty  lasts,  so  the  above  limitation
may not apply to you.

National Statutory Rights

Consumers  have  legal  rights  under  applicable
national  legislation  governing  the  sale  of  consumer
goods.   Such  rights  are  not  affected  by  the
warranties in this Limited Warranty.

No Other Warranties

No VDO dealer, agent, or employee is authorized
to make any modification, extension, or addition to
this warranty.

Warranty Periods

The warranty period for the VDO TPMS Go device
is two years.

5. SAFETY  BATTERY  AND  CHARGE

INFORMATION

You  must  read  and  understand  these
safety  instructions  and  warnings  before
using or charging your Li-Po batteries.

Operating environment

Remember 

to 

follow 

any 

special 

current

regulations  in  any  area,  and  always  switch  off
your  device  when  its  use  is  prohibited  or  when  it
may cause interference or danger.

Use  the  device  only  in  its  normal  operating
positions.

Your  device  and  its  enhancements  may  contain
small  parts.  Keep  them  out  of  the  reach  of  small
children.

About Charging

Use  only  the  charger  supplied  with  your  device.
Use  of  another  type  of  charger  will  result  in
malfunction and/or danger.

Summary of Contents for TPMS Go




































Reviews: