background image

Notes on operating instructions

Please read this information carefully and follow all the instructions outlined below. This will
ensure reliable operation and durability of your unit.
Keep the packaging and operating instructions in a safe place in order to pass them on to a
subsequent owner in the event of selling the unit at a later date.

The following reading aids are used to simplify these operating instructions:

asks you to perform an action.

:

shows the unit’s reaction.

provides extra info.

identifies a list.

A

Safety instructions and warnings contain important information for the safe use of the unit.

Failure to observe this information may result in material damage or personal injury. Therefore,
please observe this information with particular care.

Safety instructions

A

For safety reasons, the driver should not watch TV/DVD or similar when driving.

Please note that it is illegal in certain countries to watch or to operate a TV/DVD or similar device
when driving.

A

Only use the monitor for its intended purpose.

A

If an electronic reverse monitoring camera is used, ensure that this does not cause a hazard.

Any damage caused through the use of such systems is the sole responsibility of the driver.

A

Do not clean using cleaning fluid, alcohol or other solvents. Use only a damp cloth.

Features

With its standard RCA/”cinch” connections, the MM 2700 is primarily designed for connection
to entertainment AV sources (DVD players, TV tuners, games consoles, etc.).
It is also possible to use the unit in connection with the navigation computers PC54xx and
higher (CA 1255 adapter cable required).

7-inch 16:9 TFT-LCD colour monitor

Resolution: 480 x 234 pixels (horizontal x vertical)

PAL/NTSC compatible (automatic detection)

OSD menu

Simple “Plug&Play” power supply via cigarette lighter

AV connection via cinch/RCA (video and audio L/R)

4 different display modes

Picture-mirror function (horizontal and vertical)

Built-in loudspeaker and infrared receiver

Stereo headphone output at the front of the monitor

Operation at monitor or via supplied IR remote control

GENERAL NOTES

3

English

Summary of Contents for MM 2700











Reviews: