Connection
1. Connect the mini-DIN plug of the connecting cable to the AV1 socket at the rear of the
monitor.
2. Connect the power-supply plug into a 12-V cigarette-lighter socket.
3. Connect the RCA/cinch plug to the video source
(yellow: video; red: audio R; white: audio L).
■
Permanent installation
For a permanent installation, the plug for the cigarette lighter can be removed and the
monitor can be supplied with power via the connecting cables (red and black).
Cable colour
Connection
Red
+12 V ignition positive / accessory contact
Black
Battery negative / earth
Before starting work, disconnect the earth lead from the negative terminal of the vehicle
battery in order to prevent short circuits. At the same time, follow the vehicle manufacturer’s
safety instructions (alarm system, airbag, immobiliser, radio coding, etc.).
A
The fuse of the red connecting cable (+ 12 V) must not be removed.
A
The + 12 V ignition positive / accessory contact must be designed for a current of at least 2 A.
A
Only connect electrical signals to suitable connecting points in the vehicle.
■
Remote-control output
If you use a VDO Dayton DV 6100 / DV 6200 DVD player, you can connect the 3.5-mm jack on
the monitor connecting cable to the remote-control input on the DVD player. The remote-
control signals will then be received by the monitor and forwarded to the DVD player.
■
Compatibility
❏
The MM 2700 is compatible with the PC 54xx navigation computers and above (CA 1255
adapter cable is required).
❏
The MM 2700 can be used to a limited extent in conjunction with the MI 2xxx multimedia
interface boxes (CA 1255 adapter cable is required).
❏
The MM 2700 is not compatible with the MI 5000 or MC 5400.
INSTALLATION INSTRUCTIONS
8
